Adblue Fix

Peugeot 5008 Stuck in Limp Mode? AdBlue Delete & NOx Sensor Fix

Is your Peugeot 5008 showing AdBlue warnings, SCR system errors, or constant NOx sensor faults? If so, you’re not alone. The AdBlue system in the 5008 is known for repeated failures that leave drivers facing expensive repair bills and cars dropping into limp mode.
At Adblue Fix, we provide a permanent AdBlue delete and NOx sensor removal service for the Peugeot 5008. With over 10 years of experience, 500+ five-star reviews, and both a Slough workshop and a mobile service covering most of England, we’re the trusted name for AdBlue solutions in the UK.


Why Peugeot 5008 Owners Choose AdBlue Delete

The Peugeot 5008 is a premium SUV, but its AdBlue (SCR) system is notoriously unreliable. Instead of helping emissions, it often causes dashboard warnings, limp mode, and breakdowns.

Typical Peugeot 5008 AdBlue problems include:

  • Dashboard message: “No engine start in 600 miles – AdBlue fault.”

  • NOx sensor failures (even after costly replacements).

  • Fault codes like P20E8, P207F, P229F.

  • Expensive dealer repair bills.

  • Sudden limp mode, reducing power and leaving you stranded.

Our AdBlue delete service gives you a permanent fix:
✅ No more AdBlue refills.
✅ No more dashboard warnings or codes.
✅ No more limp mode.


Peugeot 5008 AdBlue & NOx Fault Codes We Fix

These are the most common codes 5008 owners encounter:

  • P20E8 – Reductant Pressure Too Low

  • P207F – Reductant Quality Performance

  • P229F – NOx Sensor 2 Bank 1 Performance

  • P20EE – SCR NOx Catalyst Efficiency Below Threshold

  • U029D – Lost Communication with NOx Sensor

Our ECU reprogramming permanently removes these codes.


How We Fix Peugeot 5008 AdBlue Issues

We’ve refined our process to make it quick and stress-free:

  1. Diagnostic Check – We scan your ECU and confirm fault codes.

  2. ECU Reprogramming – Our engineers electronically remove the AdBlue and NOx system.

  3. Final Testing – We confirm the 5008 runs smoothly with no limp mode, no warnings, and no reliance on AdBlue.

⏱ The job takes around 1 hour.
🚗 Available at our Slough workshop or via our mobile service across England.


Areas We Cover

Our workshop is based in Slough, but our mobile team covers most of England. Locally, we serve:

  • Windsor

  • Maidenhead

  • Reading

  • High Wycombe

  • Uxbridge

  • Heathrow

  • Bracknell

  • Egham

  • Hounslow

For customers further afield, our mobile service covers the majority of England.


Why Choose Adblue Fix for Your 5008?

⭐ 500+ verified five-star reviews
🛠 10+ years’ experience with Peugeot vehicles
🚐 Mobile service across most of England
🏭 Slough workshop for local customers
💻 Permanent ECU solution (not cheap plug-in devices)
🏆 Trusted by trade fleets and private owners alike

When it comes to Peugeot 5008 AdBlue delete & NOx sensor removal, we’re the UK’s leading specialists.


Frequently Asked Questions

How long does a Peugeot 5008 AdBlue delete take?
About 1 hour from start to finish.

Will my 5008 pass MOT with an AdBlue delete?
Yes – MOT testers don’t check AdBlue fluid levels. Our solution ensures no warning lights or limp mode.

What if my NOx sensor is already faulty?
That’s fine – our software removes the NOx system completely, eliminating future codes.

Do you offer a mobile service?
Yes – we cover most of England, or you can book at our Slough workshop.


Book Your Peugeot 5008 AdBlue Delete Today

Stop wasting money on AdBlue and NOx repairs. Choose Adblue Fix for a permanent solution trusted by Peugeot 5008 drivers nationwide.

📞 Call us on 01753 439130 to book your 5008 AdBlue delete or NOx sensor removal.
📍 Visit our Slough workshop or book our mobile service anywhere in England.

With more than 10 years of experience and hundreds of five-star reviews, we are the UK’s trusted choice for Peugeot 5008 AdBlue delete services.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top